DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

creating a static route to send certain traffic down wan2

  • bandicoot
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
08 May 2013 09:00 #76096 by bandicoot
Hi

I need to get traffic for 82.129.64.192/26 and 84.45.62.128/25 to go down wan2 with the rest by default down wan1. I configured two static routes as follows:

IP 82.129.64.192 Subnet 255.255.255.192 Gateway 10.0.0.1 (IP of router) Interface WAN2
IP 84.45.62.128 Subnet 255.255.255.128 Gateway 10.0.0.1 (IP of router) Interface WAN2

but when I ping known IPs in these blocks that should reply I get nothing back.

What am I doing wrong?

Thanks in Advance.

Please Log in or Create an account to join the conversation.

  • bandicoot
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
08 May 2013 11:38 #76099 by bandicoot
Probably worth mentioning that the router is a Draytek 2820 on 10.0.0.1 with Wan2 connecting via a Draytek Vigor 120

Please Log in or Create an account to join the conversation.

  • bandicoot
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
09 May 2013 10:30 #76122 by bandicoot
doesnt make sense to me since already specified wan2 as the connection I want to use, but in the static route if I specify the gateway of that broadband connection (not the internal router ip but isp public ip) it works.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami