DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Which is highest priority 0 or 7?

  • milltech
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
07 May 2013 20:28 #76091 by milltech
Which is highest priority 0 or 7? was created by milltech
Can someone confirm if the priority range goes from 0 as the highest to 7 as the lowest, or from 7 as the highest down to 0 as the lowest please?

Please Log in or Create an account to join the conversation.

More
08 May 2013 12:53 #76102 by babis3g
Replied by babis3g on topic Re: Which is highest priority 0 or 7?
I have never tried QoS etc to confirm 100% but Logical ... packets in a high priority queue leave the switch before packets in other queues ... so 7 the highest, 0 the lowest

Please Log in or Create an account to join the conversation.

  • milltech
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
08 May 2013 12:59 #76103 by milltech
Replied by milltech on topic Re: Which is highest priority 0 or 7?
Yes, that is what I thought however Draytek Support said it was the other way around. :shock:

I could do with being sure before I start playing!

Please Log in or Create an account to join the conversation.

More
08 May 2013 13:03 #76104 by babis3g
Replied by babis3g on topic Re: Which is highest priority 0 or 7?
Is it QoS you need or for traffic priority?

Please Log in or Create an account to join the conversation.

  • milltech
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
08 May 2013 13:11 #76105 by milltech
Replied by milltech on topic Re: Which is highest priority 0 or 7?
It is for prioritising VLAN traffic

Please Log in or Create an account to join the conversation.

More
08 May 2013 13:22 #76106 by babis3g
Replied by babis3g on topic Re: Which is highest priority 0 or 7?
Again Logical 7 should be the highest and so have first priority but with Vlan never seen draytek using priorities to their screenshots .. but are always to 0
Well :) soon it seems you will find out

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami