DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 connected via WAN2, from 2830 to extend LAN

  • fritserasmus
  • Topic Author
  • Offline
  • Banned
  • Banned
More
17 Apr 2013 12:10 #75880 by fritserasmus
I am using a 2830 as my primary Router configured to supply internet with a backup. All works fine.

I have configured the 2820, in my basement to supply internet in the basement and to be on the same network like being able to browse a server next to primary router.
From the secondary router I can "Network Connect" to a PC on the primary Router's network (upwards) [Internet works fine. Printing to the networked printer via shared printer works, although not ideal as the PC that is sharing the printer might be switched off then I am stuck] but I cannot connect to a PC to browse that PC on the secondary network. (downwards)


Info
Primary:
2830
192.168.1.X Subnet 255.255.255.0


Secondary:
2820
192.168.2.X Subnet 255.255.255.0

I tried to configure secondary to do a DHCP Relay, but once that is done I can no longer access the secondary router.
I do not know if that is the correct thing to do either.

Could any of you perhaps assist in setting this rig up?

Thanking in advance

Please Log in or Create an account to join the conversation.

  • fritserasmus
  • Topic Author
  • Offline
  • Banned
  • Banned
More
20 Apr 2013 14:44 #75904 by fritserasmus
Replied by fritserasmus on topic Re: 2820 connected via WAN2, from 2830 to extend LAN
I was able to resolve this, so this post is closed.

Frits

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami