DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 3900 (1.0.6) Flaky and then Died

More
16 Apr 2013 14:35 #75875 by ghostworks
Replied by ghostworks on topic Re: Vigor 3900 (1.0.6) Flaky and then Died
Is your new one a new hardware revision ? My unit sometimes hits 98% CPU load and my network isn't a enterprise network , more small business

Please Log in or Create an account to join the conversation.

  • freedom
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
29 Apr 2013 10:48 #75976 by freedom
Replied by freedom on topic Re: Vigor 3900 (1.0.6) Flaky and then Died
There are no noticeable marks on the unit itself to suggest a hardware revision and the interface still shows 1.0.

I too now have the 98% CPU and the thing seems to be slowing to a crawl. We fix one problem and get another!

Please Log in or Create an account to join the conversation.

More
29 Apr 2013 11:40 #75978 by ghostworks
Replied by ghostworks on topic Re: Vigor 3900 (1.0.6) Flaky and then Died
I know what you mean , yesterday I logged in and one of my adsl WAN lines was down , wouldn't connect and if it did would only last 7 minutes then off again , swopped the two lines around to see if problem changes from one wan to the other to point to equipment or lines from ISP , no change till today then both business adsl went but home cheap adsl for guest was fine ...

Now seems fine , could be ISP changing dslams etc for business lines
See how it is tomorrow

Please Log in or Create an account to join the conversation.

  • freedom
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
29 Apr 2013 12:30 #75981 by freedom
Replied by freedom on topic Re: Vigor 3900 (1.0.6) Flaky and then Died
Well I've got a ticket open with some output from the console - will update on responses.

Please Log in or Create an account to join the conversation.

More
29 Apr 2013 12:49 #75982 by ghostworks
Replied by ghostworks on topic Re: Vigor 3900 (1.0.6) Flaky and then Died
Which faults did you ask to be checked out ??!

Please Log in or Create an account to join the conversation.

More
09 May 2013 22:48 #76142 by redmonkey
Replied by redmonkey on topic Re: Vigor 3900 (1.0.6) Flaky and then Died
Hi,
Just to keep this thread updated, I have found the latest firmware a lot more stable but it hasn't given me complete confidence. The changes I have made are that the network infrastructure was upgraded to gigabit switches throughout, port mirroring has been turned off and the unit was upgraded to 1.0.6.1 firmware. I have only had to restart the unit every other week. The restart has mainly been down to VPN's being unstable rather than loss of internet connectivity (then again the internet connections haven't been unstable).
Let me know how you are doing?
Thanks
Ned

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami