DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2130n and Virgin Settings

  • garycpos
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 Mar 2013 16:33 #75580 by garycpos
Vigor 2130n and Virgin Settings was created by garycpos
Hi All,

Searched for posts associated with this and could not find any ?

Does anyone have the correct settings for connecting to Virgin Broadband on a 2130 ? I am currently using a Netgear WNDR3700 which is different completely.

I am just getting WAN Disconnected all of the time ??

Thanks

Gary

Please Log in or Create an account to join the conversation.

More
14 Mar 2013 16:34 #75581 by babis3g
Replied by babis3g on topic Re: Vigor 2130n and Virgin Settings
Hi is it adsl or cable?

Please Log in or Create an account to join the conversation.

  • garycpos
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 Mar 2013 16:44 #75582 by garycpos
Replied by garycpos on topic Re: Vigor 2130n and Virgin Settings
It is Cable ...

Thanks

Gary

Please Log in or Create an account to join the conversation.

More
14 Mar 2013 17:04 #75583 by babis3g
Replied by babis3g on topic Re: Vigor 2130n and Virgin Settings
I don't have this model but until a member comes with more instructions you can try at
WAN >> Internet Access >> enable and give a go via static ip
Reboot both 2130 & SH (better set it at modem mode)
If not get the ip & submusk automatic follow the same reboots after set it via DHCP method

Here some posts if will help you by cloning mac address
http://www.forum.draytek.co.uk/viewtopic.php?f=2&t=18049&p=75132&hilit=2130#p75132
If you connect & speed is lower then see this post
http://community.virginmedia.com/t5/Up-to-30Mb-Setup-Equipment/draytek-2130n-Super-hub-modem-mode-drop-in-speed/td-p/1099349
and turn off qos & dos or set them higher value

With my 2850 is set with VM 100mb via static or dymanic ip and uses DHCP

Please Log in or Create an account to join the conversation.

  • garycpos
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 Mar 2013 18:22 #75584 by garycpos
Replied by garycpos on topic Re: Vigor 2130n and Virgin Settings
Thanks M8, I will give it a go, I did find one post you replied on in regards to the cloned mac address and I think this could be the problem.

Cheers

Gary

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami