DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 and RX CRC errors.

  • mgillespie
  • Topic Author
  • Visitor
  • Visitor
12 Mar 2013 15:26 #75550 by mgillespie
2820 and RX CRC errors. was created by mgillespie
Have a 2820 and seem to be getting a high amount of RX CRC errors, so much that Loveflim streaming somtimes burps, and webpages fail to load.

Other times thinks work fine (although the error rates goes gradually climb). At times, error rate goes mental, last night nothing worked, everything was coming back as error, I rebooted the router and it started working fine again.

Running the standard UK ADSL firmware and my line stats:

Code:
ADSL2+(G.992.5) Up Speed:444937 Down Speed:14336000 SNR Margin:7 Loop Attenuation:32


I am getting 0.4% CRC on the RX.

RX packets (over 3 days) 12761850
RX CRC errors (over same period) 59750

Please Log in or Create an account to join the conversation.

More
12 Mar 2013 16:59 #75552 by babis3g
Replied by babis3g on topic Re: 2820 and RX CRC errors.
You can try some other modem codes
Some suggestions are 2471201,2431301,244001
The first one is also suggested for most UK lines.Note the loop attenuator should be also lower with them 3 firmware codes
Not master reset needed if you will use the same firmware ... example V3.3.7.3_2471201 ... V3.3.7.3_2431301 so the all* file is fine

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami