DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

USERNAME DEFAULT

  • scott waugh
  • Topic Author
  • Offline
  • New Member
  • New Member
More
18 Feb 2013 15:31 #75252 by scott waugh
USERNAME DEFAULT was created by scott waugh
I have a 2820 which i can access via admin password. Is it possible to default the username if it has been changed and i cant access or amend via system maintiance.
Vigor2830Vn
Firmware Version : 3.3.6.1db_232201

Thanks

Please Log in or Create an account to join the conversation.

More
18 Feb 2013 16:09 #75254 by babis3g
Replied by babis3g on topic Re: USERNAME DEFAULT
If passwords was forgotten i think you need perform master reset, but wait until some one confirms as well

If you don't have many settings to do back from the begin, maybe is a chance to use or try the new firmware 3.6.3 from here (using the rst* file) n plus or dual band first post box
http://www.draytek.co.uk/support/downloads.html

Please Log in or Create an account to join the conversation.

More
18 Feb 2013 20:23 #75260 by voodle
Replied by voodle on topic Re: USERNAME DEFAULT
that's practically the release firmware hehe, I update drayteks from the release firmware for just that reason. I know what you're referring to since my 2830 has it, it's had the user account disabled ever since I've had it though.

Please Log in or Create an account to join the conversation.

  • scott waugh
  • Topic Author
  • Offline
  • New Member
  • New Member
More
18 Feb 2013 22:11 #75265 by scott waugh
Replied by scott waugh on topic Re: USERNAME DEFAULT

Voodle wrote: that's practically the release firmware hehe, I update drayteks from the release firmware for just that reason. I know what you're referring to since my 2830 has it, it's had the user account disabled ever since I've had it though.




Thanks for the help I will try this.

Please Log in or Create an account to join the conversation.

More
26 Feb 2013 06:17 #75333 by thomas_kimbal
Replied by thomas_kimbal on topic Re: USERNAME DEFAULT
thanks guy your discussion is very helpful for me. please to see post and replies.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami