DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2850n VDSL and ADSL Dual WAN settings

  • pgudge
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
25 Jan 2013 19:55 #74948 by pgudge
Hi,

I'm on Digital Region (VDSL) and Plusnet (ADSL2), when I connect the splitter and fire up the router both lines sync, WAN1 (ADSL) connects fine and I can reach the internet, however the WAN4 (VDSL) port won't let me select anything but PPPoE, Static, or PPTP. I guess it needs to be PPPoA aswell, but there is no option for this. The WAN4 status just shows

Message [ PPPoE : No response from server side. ]

I take it, it should be possible to have a PPPoA connection on both the WAN1 and WAN4 port simultaneously? but how?

Thanks for any info.


Please Log in or Create an account to join the conversation.

More
26 Jan 2013 01:01 #74950 by babis3g
Replied by babis3g on topic Re: 2850n VDSL and ADSL Dual WAN settings
Hi

Dont know if needs pppoa but At pppoe did you add your username & pass? to see if works
Talk Talk to connect with vdsl it needs static or dynamic ip option so check what needs for digital region

An important point is to check at WAN >> General Setup>>wan>>VLAN Tag insertion enable>>tag value 101
Then WAN>> General set up>>Enable Dual DSL

Each connection has to set up different depending what each provider use
Also here some screenshot with small info
http://www.draytek.co.uk/support/kb/kb_vigor_v2850_dualDSL_setup.html

Please Log in or Create an account to join the conversation.

  • pgudge
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
26 Jan 2013 01:43 #74951 by pgudge
Replied by pgudge on topic Re: 2850n VDSL and ADSL Dual WAN settings
DUDE! Nice one, all working :)

I didn't have the VLAN Insertion enabled, enabling and adding 101 failed (as expected) after a quick 1, 2, 3 burst, I got to 10 and logged right on in there :)

After a quick search it looks like quite a few DR ISP's are on 10, I'm on Ask4 and I've just read Origin is also on 10.

Thanks for the reply, and the solution :D

Please Log in or Create an account to join the conversation.

More
26 Jan 2013 01:49 #74952 by babis3g
Replied by babis3g on topic Re: 2850n VDSL and ADSL Dual WAN settings
Welcome and enjoy it
No vdsl for me because i am direct to exchange :x but never mind

Please Log in or Create an account to join the conversation.

  • pgudge
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
26 Jan 2013 01:53 #74953 by pgudge
Replied by pgudge on topic Re: 2850n VDSL and ADSL Dual WAN settings
"direct to exchange"?

Please Log in or Create an account to join the conversation.

More
26 Jan 2013 13:11 #74955 by babis3g
Replied by babis3g on topic Re: 2850n VDSL and ADSL Dual WAN settings
Yeah
FTTC is Fibre To The Cabinet (there after from the cabinet to premise/home via normal cooper line or VDSL as you called)
My line is not going to any cabinet so not FTTC/VDSL for me but just the normal adsl (broadband)line

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami