DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Firmware

  • wilburforce
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Jan 2013 10:18 #74825 by wilburforce
Firmware was created by wilburforce
I have a 2820, originally with 3.2.1 , I have upgraded to 3.5.2 and then to 3.7.3 as per instructions, but now the 2820 will not connect to the internet; WAN1 status continually reports "PPP Shutdown". all settings are checked and correct. ISP is BT. Please help !!!

Please Log in or Create an account to join the conversation.

More
17 Jan 2013 11:12 #74826 by sicon
Replied by sicon on topic Re: Firmware
did you use the .all or rst?
I know if you log a case with draytek they will advise the firmware upgrade again using the .rst and then re-configure the device from scratch (if you used the .all that is)

Please Log in or Create an account to join the conversation.

More
17 Jan 2013 16:28 #74834 by voodle
Replied by voodle on topic Re: Firmware
could you put up a screenshot of the wan - internet access - WAN1 page and maybe wan - general setup? (i guess censor any account details :)) Also the online status page would be useful - PPP shutdown signifies that ADSL is working and it's found the PPP server so it's probably just a router setting that didn't move over to the new firmware very well that's either not allowing it to connect or is making it drop the connection.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami