DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2920n Multiple Network Setup

More
16 Jan 2013 20:30 #74823 by pjc3
2920n Multiple Network Setup was created by pjc3
Hi Guys,

We have recently purchased a new 2920n.

We have two separate networks setup on the 2920n (see below) my problem is I want to be able to use the printers/file shares on the first network from the second network. I have tried load of options in vlan settings etc but no joy. Any help would be much appreciated at this stage,

Network 1

range: 10.2.2.0
subnet:255.255.255.0
Gateway: 10.2.2.254

Port 1 on draytek

dhcp supplied by sbs2011

Network 2

range: 192.168.10.0
subnet:255.255.255.0
Gateway: 192.168.10.254

Port 2 on draytek

dhcp supplied by draytek


Many Thanks

Please Log in or Create an account to join the conversation.

More
17 Jan 2013 11:34 #74828 by sicon
Replied by sicon on topic Re: 2920n Multiple Network Setup
Does the 2920 have the inter-lan routing option?

Please Log in or Create an account to join the conversation.

More
17 Jan 2013 16:30 #74835 by voodle
Replied by voodle on topic Re: 2920n Multiple Network Setup
It does, but if it's routing between the two - you need to set a static route to the 2920's subnet on the other router for traffic to pass across it. If you don't have access to the router, the best thing to do is use a WAN interface on the 2920 and access that other network via NAT.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami