DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2710n USB Printer Issue Since F/W Upgrade

  • bjblackmore
  • Topic Author
  • Offline
  • New Member
  • New Member
More
18 Dec 2012 09:36 #74563 by bjblackmore
2710n USB Printer Issue Since F/W Upgrade was created by bjblackmore
Hi,

I have a 2710n through which I have a Samsung SCX-4300 USB printer connected. Before last week, I was able to print to this via both my desktop (wired) and laptop & tablet (wireless). However last week I performed a firmware upgrade from 3.3.5 to 3.3.7 (had some issues with corrupt firmware, see this post for details: http://www.forum.draytek.co.uk/viewtopic.php?f=14&t=17902 ), since then, i am unable to print. Initially I didn't modify the printer setting on the desktop/laptop, using the previous setting, but kept getting 'Printer Error' in the Windows print queue. So I deleted the printer & port, and added again, using the below settings, however this still results in a print error message when trying to print. The 2710n shows the USB LED as lit, so it knows the printer is connected, I've chekced the printer itself for all the usual errors (paper in tray, no jam, toner etc).

Port Settings:
IP: 192.168.0.1 (desktop = 192.168.0.10 & laptop = 192.168.0.11)
Protocol: LPR
LPR Queue: p1

Any help would be appreciated. Maybe I need to roll back to F/W 3.3.5, if it's available for download!

Thanks

Ben

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami