DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2820n WAN2 setup

More
04 Nov 2012 23:08 #74025 by ghostworks
Replied by ghostworks on topic Re: Vigor 2820n WAN2 setup
I'm not familiar with your 3G wibe router

Have you looked into the USB interface of the 2820 , as you can join up a 3G wan that way ,

Please Log in or Create an account to join the conversation.

  • craigside
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
05 Nov 2012 07:58 #74027 by craigside
Replied by craigside on topic Re: Vigor 2820n WAN2 setup
Hi yes I am aware, but the USB 3G connection on the router isn't an option for me, hence the 3G router connected via Ethernet...

Please Log in or Create an account to join the conversation.

More
05 Nov 2012 09:47 #74028 by ghostworks
Replied by ghostworks on topic Re: Vigor 2820n WAN2 setup
I have reviewed the WiBE online now...

I'd try by disabling dhcp on the WiBE , give it a static IP ie 192.168.0.1 and tell it to use 192.168.0.2 as a DMZ ( De-militarized Zone ) so you don't end up with 2 Firewalls, ensure the 3G WiBE is connected and check its DNS settings its picked up via 3G and gateway and its WAN connection ,write them down.

Connect 3G WiBE to WAN2 of 2820 , give WAN2 on 2820 static ip of 192.168.0.2 with the DNS of what you written down and gateway of first try 192.168.0.1 if doesn't work change gateway to the 3G WAN interface

Hope that helps

Please Log in or Create an account to join the conversation.

More
05 Nov 2012 09:52 #74030 by ghostworks
Replied by ghostworks on topic Re: Vigor 2820n WAN2 setup
which do you have HS7 or HS21 ??

Please Log in or Create an account to join the conversation.

  • craigside
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
05 Nov 2012 10:03 #74034 by craigside
Replied by craigside on topic Re: Vigor 2820n WAN2 setup
Hi, I have the HS21. Apparently its a new model and there is no manual out for it yet?

Please Log in or Create an account to join the conversation.

More
05 Nov 2012 10:05 #74036 by ghostworks
Replied by ghostworks on topic Re: Vigor 2820n WAN2 setup
that one was released in October 2012

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami