DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

VIGOR 3200

  • konstantin
  • Topic Author
  • Offline
  • New Member
  • New Member
More
11 Oct 2012 16:16 #73803 by konstantin
VIGOR 3200 was created by konstantin
Hi there,
I am having a strange problem forwarding port 443 to a windows 2008 standard R2 server.
When I scan from for instance www.mxtoolbox.com i can see that the port is active,
if i telnet the port i can also connect.
But for some strange reason it does not relay the trafic to my OWA on exchange 2010.
I replaced the router with a standard ADSL2+ router and it works.
Firewall on the router is disabled and even then i cannot access the OWA.?

Please Help

Please Log in or Create an account to join the conversation.

More
11 Oct 2012 22:17 #73806 by weehappypixie
Replied by weehappypixie on topic Re: VIGOR 3200
I would log into the router and then select management and see if you have port 443 set for the Drayteks HTTPS remote management and if so change it to say 8443.

Have you created a NAT rule to forward 443 to your 2K8 server. It does work as I use it :)

John

Please Log in or Create an account to join the conversation.

  • konstantin
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 Oct 2012 10:57 #73815 by konstantin
Replied by konstantin on topic Re: VIGOR 3200
Hi John,
Thank's for your reply....I will try to make the changes you suggested.
I am guessing it would work :)
Thank's again your your help.

Constantine

Please Log in or Create an account to join the conversation.

  • konstantin
  • Topic Author
  • Offline
  • New Member
  • New Member
More
27 Oct 2012 16:02 #73946 by konstantin
Replied by konstantin on topic Re: VIGOR 3200
Hi there i checked but the remote management is set to port 4443 for https... :shock:
Yes I have forwarded the port to the server IP

Please Log in or Create an account to join the conversation.

More
11 Nov 2012 16:16 #74158 by nc1402
Replied by nc1402 on topic Re: VIGOR 3200
Hi Konstantin,
Because 3200 supports SSL VPN so you must to change SSL port too
Web Access Control >> General Setup
Port: 8443

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami