DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2955 with Vigor 120 not working

  • nickbiddle
  • Topic Author
  • Offline
  • New Member
  • New Member
More
08 Oct 2012 16:45 #73771 by nickbiddle
Vigor 2955 with Vigor 120 not working was created by nickbiddle
Hi All

Wondering if anyone could help

I have a vigor 2955 with two vigor 120 going to ADSL.

When i first set them up I had difficulty with getting the second wan to work, the 120 will sync up with the exchange but it gets stuck on the PPP dial on the 2955. but after leaving it for a week i came back to it one day and it was working :shock:

ever since then (year or so) its been fine and worked great, until last week. I upgraded the router to 3.3.1 so I can use a 2048 SSL certificate. Since i've upgraded the router the second WAN hasn't work!

i am amusing it must be a setting somewhere in the 2955 that needs changing cos it was working fine before the upgrade.

here is a snapshot of the WAN log

WAN2 PPPoE ==> Protocol:LCP(c021) ConfRej Identifier:0x01 MRRU: 1524 ##
WAN2 PPPoE <== Protocol:LCP(c021) ConfReq Identifier:0x02 MRU: 1552 Authentication Type: CHAP 05 Magic Number: Endpoint Discriminator Locally Assigned Address: ##
WAN2 PPPoE ==> Protocol:LCP(c021) ConfAck Identifier:0x02 MRU: 1552 Authentication Type: CHAP 05 Magic Number: Endpoint Discriminator Locally Assigned Address: ##
WAN2 PPPoE ==> Protocol:LCP(c021) ConfReq Identifier:0x09 MRU: 1500 MRRU: 1500 Endpoint Discriminator Locally Assigned Address: ##
WAN2 PPPoE <== Protocol:LCP(c021) ConfReq Identifier:0x01 MRU: 1552 Authentication Type: CHAP 05 Magic Number: MRRU: 1524 Endpoint Discriminator Locally Assigned Address: ##
WAN2 PPPoE ==> Protocol:LCP(c021) ConfRej Identifier:0x01 MRRU: 1524 ##
WAN2 PPPoE <== Protocol:LCP(c021) ConfReq Identifier:0x02 MRU: 1552 Authentication Type: CHAP 05 Magic Number: Endpoint Discriminator Locally Assigned Address: ##
WAN2 PPPoE ==> Protocol:LCP(c021) ConfAck Identifier:0x02 MRU: 1552 Authentication Type: CHAP 05 Magic Number: Endpoint Discriminator Locally Assigned Address: ##
WAN2 PPPoE ==> Protocol:LCP(c021) ConfReq Identifier:0x0A MRU: 1500 MRRU: 1500 Endpoint Discriminator Locally Assigned Address: ##
WAN2 PPPoE <== Protocol:LCP(c021) ConfReq Identifier:0x01 MRU: 1552 Authentication Type: CHAP 05 Magic Number:
MRRU: 1524 Endpoint Discriminator Locally Assigned Address: ##
WAN2 PPPoE ==> Protocol:LCP(c021) ConfRej Identifier:0x01 MRRU: 1524 ##

I am thinking it could be a MTU issue. The Exchange is BeThere / O2 so the 120 is using VPI 0 /VCI 101/1483 Bridged LLC


any help would be great, thanks

Nick

Please Log in or Create an account to join the conversation.

More
14 Oct 2012 23:52 #73841 by nealuk
Replied by nealuk on topic Re: Vigor 2955 with Vigor 120 not working
Do you need to re-make the MPoA secion of http://www.draytek.co.uk/support/kb_vigor100_setup.html in to your newly firmware updated 2955?

also, 3.3.1 has been superceded with ftp://ftp.draytek.com/Vigor2955/Firmware/v3.3.1.1/

not sure if this could also help to cure your problem? What firmware fo you have running on the 120's ?

Regards, Neal

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami