DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2850Vn vs 3900 to Replace 2830Vn Dual WAN

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
27 Sep 2012 10:59 #73647 by ghostworks
2850Vn vs 3900 to Replace 2830Vn Dual WAN was created by ghostworks
I have a Vigor 2830Vn currently running with a Vigor 120 v1 for the Second WAN...

The second WAN crashes every morning up to 20 times from 7am to 9am , I have had the ISP engineer over to check to two lines incase it was weather related on the outside of the building , They recon its my equipment

The Features I use on the currently Vigor 2830Vn is the Dual Network on P1 and P2 , 1 for business network and the other for guests Network , the 3900 doesn't say if it can do that and no live interface demo to check , the main reason I looked at the 3900 is the fiber modules and 4 wan , as my main swith HP 5304xl has fiber to link to it...

or would i be better of with a small bump upgrade to 2850Vn , and is there any known issues on the 2850 / 3900 yet

Please Log in or Create an account to join the conversation.

More
27 Sep 2012 14:48 #73652 by nealuk
Hello, which firmware version are you running on the 120v1 ? And which ISP please is on this line?

Thanks, Neal

Please Log in or Create an account to join the conversation.

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
27 Sep 2012 15:36 #73660 by ghostworks
Replied by ghostworks on topic Re: 2850Vn vs 3900 to Replace 2830Vn Dual WAN
Manx telecom business adsl2+ line
I think it's the latest firmware

I get constant emails from 7am to 10pm saying
Your Vigor2830 Series WAN2 interface was offline just now,
please notify the network admin for check.

Please Log in or Create an account to join the conversation.

More
28 Sep 2012 12:51 #73665 by nealuk
The latest firmware improved adsl2+ [especially annex m] so it's worth unhooking and confirming.

The older power supplies shipped with the 120v1 didn't have enough oooomph ( sorry can't be sure if it was current or voltage ) to keep and annex m adsl2+ lines stable. Any chance of taking a photo of what you have, please?

See also the section: "Some ISPs using MPoA send 'rogue' (invalid) ARP messages to the modem. This will prevent data from flowing to the Internet; the router will show you as online, with an IP address. If this occurs, you will need to telnet to the router (not the modem) and issue the command ip arp accept 1. This is available on the Vigor29XX series routers." on http://www.draytek.co.uk/support/kb_vigor100_setup.html which may be relevant.

Regards,


Neal.

Please Log in or Create an account to join the conversation.

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
28 Sep 2012 12:56 #73666 by ghostworks
Replied by ghostworks on topic Re: 2850Vn vs 3900 to Replace 2830Vn Dual WAN
Thanks

I'll post pics and update later today on setup and power supply

Please Log in or Create an account to join the conversation.

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
28 Sep 2012 13:09 #73667 by ghostworks
Replied by ghostworks on topic Re: 2850Vn vs 3900 to Replace 2830Vn Dual WAN
Vigor 120 V1 mains Adaptor is :

OEM
AC Adaptor
Model No. : AD-0950D
Input : 230v ~ 50Hz 80mA
Output: 9V 500mA
Made in China 3009 GP

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami