DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2920 - Cannot ping hosts from network ports

  • sam.wren
  • Topic Author
  • Offline
  • New Member
  • New Member
More
20 Jul 2012 10:43 #72990 by sam.wren
Hi,

I want to split our network up due to more and more users. Unfortunately I cannot ping any hosts on either of the subnets. I can ping from each port the Default Gateway on Port 1 from Port 2 but cannot communicate with anything on Port 1. This is the same from Port 1 to Port 2. I have looked at the Routing Table and the following are the entries:

Key: C - connected, S - static, R - RIP, * - default, ~ - private
* 0.0.0.0/ 0.0.0.0 via 62.8.126.241 WAN1
C 62.8.126.244/ 255.255.255.252 directly connected WAN1
C~ 192.168.0.0/ 255.255.255.0 directly connected LAN1
C~ 192.168.2.0/ 255.255.255.0 directly connected LAN2

I have set the correct VLANs up but cannot communicate between the two VLANs. Can someone please assist me?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami