DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Port forwarding

More
14 Jul 2012 13:51 #72939 by the pit
Port forwarding was created by the pit
After a firmware upgrade last night my 2920 ended up oin constant loop so I had to drag out my 2820.

The only problem I've got now is that I can't connect to my web cams via internet. I've set up port forwarding but I must be missing something.

The settings I've got are as follows

Mode SingleRange
Service Name camera name
Protocol ---UDP
WAN IP 1.All2.WAN IP Alias[1]188.222.215.219
Public Port - 8153
Private IP - 192.168.1.57
Private Port 8153

The y-cam reports udp enabled and the address to use is : http://188.222.215.219:8153

But it doesn't work so what am I missing?

Please Log in or Create an account to join the conversation.

More
14 Jul 2012 14:05 #72941 by nealuk
Replied by nealuk on topic Re: Port forwarding
Try both TCP and UDP?

udp may now be enabled, as an addition, but my guess is that TCP is the first route in, with the ability to also reply with UDP

Please Log in or Create an account to join the conversation.

More
14 Jul 2012 15:01 #72945 by the pit
Replied by the pit on topic Re: Port forwarding
Well I managed to repair my old 2920 and put that back in. I can see the camera's again.
Interestingly two of the camera's had changed the port number so when I loaded them up they showed they showed the wrong camera which suggests on the 2920 port forwarding isn't needed with udp. It also suggests the 2820 firmware I've got doesn't work with udp.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami