DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

DoS Protection 2130

More
14 Jul 2012 11:21 #72935 by cyclo
DoS Protection 2130 was created by cyclo
One of the game servers I run was DoS'd the other day, didn't last long - a minute at the most, but it was long enough to make the server completely unusable. I've noticed the 2130 has DoS defence.

I haven't enabled it as I'm unsure what a good PPS value would be. Does anyone have any ideas? I have 70mbit down / 20mbit up

Thanks.

Please Log in or Create an account to join the conversation.

More
19 Jul 2012 15:30 #72984 by j03y
Replied by j03y on topic Re: DoS Protection 2130
I refer to page 134 of the user guide...

Rate The unit is packet per second (pps). Use the drop down list to set the rate for data transmission. The rate is 2^n, where n is equal to or less than 15, or "No Limit". The unit of the rate can be either pps (packets per second) or kpps (kilopackets per second). The configuration indicates the permitted packet rate for unicast, multicast, or broadcast traffic across the switch.



Try setting each value to 7 (therefore 2^ 7 = 128 pps by my calculator) and test. That might be too low for a game server so just increment by 1 at a time if you find your clients are getting kicked!

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami