DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Guide for setting up Syslog tool

  • nps
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 Jun 2012 13:23 #72588 by nps
Is there a guide to setup the syslog tool.

I have it installed and enabled the syslog to 192.168.1.17 and port 514 from my Vigor 2820Vn. However in syslog I cant see how to connect to that server.
In tool setup it has a list of IP port and From rooter IP. How do I use these?
Thanks
Nigel

Please Log in or Create an account to join the conversation.

More
18 Jun 2012 15:41 #72643 by iamq-yesiam
Replied by iamq-yesiam on topic Re: Guide for setting up Syslog tool
You don't syslog is a 'push' service.

Once you have configured the Draytek you need to configure the syslog server to listen at the correct port/IP on the logging terminal - You may need to set the syslog.conf facility number if its a linux box which you use to run the logger.

I have syslog running on all my routers pointing back to Linux servers.

If you need more specific details reply here and I'll see if I can find you something.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami