DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Help splitting traffic between 2 internet connections

  • physcoaustinio
  • Topic Author
  • Offline
  • New Member
  • New Member
More
13 Jun 2012 16:00 #72564 by physcoaustinio
Hi everyone

We have a remote office with very slow b/band (1MB Down 1/4MB Up). It is not possible to upgrade this in anyway before you suggest it.
We are currently trialing Tooway Sat B/Band to see if it will help them out. The main issue they have is that Citrix runs very slowly. Now there can be anything form 3 - 7 people in the office, and also 3 Mitel teleworker phones going.
The Sat B/Band works great for downloading files etc - 100MB in about 3 mins, but due to the high latency Citrix runs slowly than on the 1MB ADSL.

We have a Vigor 2830 in the office and I want to know if it is possible to somehow config it so just the Citrix traffic goes down the ADSL and all the other traffic uses the Tooway B/Band.
We have played about with Auto load balancing to try and use both at the same time to get better speeds but it has no resulted in any improvements.
Is there even a way to send traffic on specific ports down to different WANs???

Please Log in or Create an account to join the conversation.

More
13 Jun 2012 20:52 #72570 by nealuk
Load Balance by ports is all you need :)

Please Log in or Create an account to join the conversation.

  • physcoaustinio
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 Jun 2012 11:54 #72586 by physcoaustinio
How do you do it by Ports, I have looked and the only way I could see was by IP.
Any ideas where it is setup?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami