DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2600 is it ADSL2+ compatible

More
06 Jun 2012 11:18 #72461 by p3asa
Vigor 2600 is it ADSL2+ compatible was created by p3asa
Searching the internet suggests the Vigor 2600 isn't ADSL2+ compatible however on Drayteks own www site it states it is.

http://www.draytek.co.uk/support/v2600_shooter.html

"Note : If your line is ADSL2 or ADSL2+, be sure to select the relevant mode in the Internet Access Setup page, otherwise the router will connect using regular ADSL only."

This is the only mention of ADSL2+ and the relevant mode it suggests changing isn't even in that drop down box!!

Any ideas?

Please Log in or Create an account to join the conversation.

More
13 Jun 2012 00:41 #72560 by townski
Replied by townski on topic Re: Vigor 2600 is it ADSL2+ compatible
I've got the 2600G and it's not ADSL2+ compatible, though our BT exchange is enabled. I decided not to bother upgrading and wait for fibre which worked out quite well as that was enabled shortly after.

There's no ADSL2 or ADSL2+ modes in the Internet Access Setup page on my 2.5.9_UK firmware.

Please Log in or Create an account to join the conversation.

More
13 Jun 2012 17:03 #72566 by p3asa
Replied by p3asa on topic Re: Vigor 2600 is it ADSL2+ compatible
Thanks for that.

I thought as much but found it strange why Draytek would say it was compatible on their www site. Shame really as the Vigor 2600G has been flawless. Oh well looks like it will live on as a switch.

Good luck with your fibre, wish it was up my way!!

Please Log in or Create an account to join the conversation.

More
16 Jun 2012 13:51 #72622 by townski
Replied by townski on topic Re: Vigor 2600 is it ADSL2+ compatible
Fibre's ok, I knew what I was getting when I ordered it - it's a bit of a distance to the cabinet so it's just 20 / 2 - but it's still triple what I had on ADSL.

2850vn doing ok but have noticed a few seemingly-random dropouts and I'm about to start posting in the many threads there appear to be about it. Grr... typical isn't it? 2600G was flawless here too, absolutely rock connection to Zen over something like 8 years.

Please Log in or Create an account to join the conversation.

More
18 Jun 2012 10:34 #72636 by sahe1971
Replied by sahe1971 on topic Re: Vigor 2600 is it ADSL2+ compatible
I decided not to bother upgrading and wait for fibre which worked out quite well as that was enabled shortly after.



Please Log in or Create an account to join the conversation.

Moderators: ChrisSami