DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Incoming Firewall Rule

  • pepps1976
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
17 May 2012 21:47 #72271 by pepps1976
Incoming Firewall Rule was created by pepps1976
Hoping Somebody Can Help me

i am trying to setup a fire wall rule that will only allow Access Via RDP (3389) from a certain ip address to a machine on my LAN.

I have created a service object called it RDP with a port of 3389. i then have added a rule in the default set to allow access from IP Address using the service Object i created to go to the internal ip address on my LAN and have set that to PASS, However i never seem able to connect.

I f i go into Nat open ports and open up port 3389 i can then connect but i do not want to do that as it allows anybody access so i wish to lock it down via a rule.

Can any body pick up on something i may have missed here.

John

Please Log in or Create an account to join the conversation.

More
21 May 2012 12:49 #72283 by nealuk
Replied by nealuk on topic Re: Incoming Firewall Rule
Hi John,

for your Service Type Object "RDP" ensure the Source Port is 1 to 65535

Destination port can be = 3389 ~ 3389

Regards, Neal

Please Log in or Create an account to join the conversation.

  • pepps1976
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
22 May 2012 10:09 #72303 by pepps1976
Replied by pepps1976 on topic Re: Incoming Firewall Rule
Thank You Thats done it

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami