DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

3g/4g USB Stick Huawei e366 on Vigor 2830n

  • tester2830n
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Apr 2012 17:02 #72026 by tester2830n
3g/4g USB Stick Huawei e366 on Vigor 2830n was created by tester2830n
I am trying to get 3g USB Stick Huawei e366 to work with Vigor 2830n. On Wan3 I see Signal as good. But everything else is empty. Up time is 0.

Version of firmware I have on Vigor 2830n is v2830_a4_3361. I have setup the apn to my mobile internet provider. I have set the connetion to be PPP. Not sure what else I need to do the set this up to work.

Please advice.

Thanks.

WAN 3 Status >> Dial PPP

Enable Line Name Mode Up Time Signal
Yes USB PPP 00:00:00 54%
(Good)
IP GW IP TX Packets TX Rate(Bps) RX Packets RX Rate(Bps)
--- --- 176 0 0 0



Modem Initial String:

Modem Initial String2:

Modem Dial String:ATDT*99#
ATDT*99# or CDMA:ATDT#777 or TD-SCDMA*98*1#

PPP Authentication: PAP or CHAP



My internet provider is from Canadian mobile operator, apn is internet.windmobile.ca

Please Log in or Create an account to join the conversation.

  • tester2830n
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Apr 2012 22:44 #72028 by tester2830n
Replied by tester2830n on topic Re: 3g/4g USB Stick Huawei e366 on Vigor 2830n
I have also tried another usb data stick/dongle Huawei E1691. Same issue as above.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami