DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2710v & Buffalo NAS WebAccess

  • dave_c
  • Topic Author
  • Offline
  • New Member
  • New Member
More
13 Apr 2012 11:20 #71880 by dave_c
Vigor 2710v & Buffalo NAS WebAccess was created by dave_c
Hi Guys,

I have a Buffalo Linkstation CH1 connected to my small LAN which works fine. I setup WebAccess on it...I can connect to it using WebAccess when inside the LAN but cannot connect to it from outside the LAN over the internet.

Have set up port redirection external -> internal using the ports it requires.

UPnP is enabled in the 2710v....

It seems to be a port opening problem....

Any ideas pls??

Thanks, Dave

Please Log in or Create an account to join the conversation.

More
13 Apr 2012 12:00 #71882 by nealuk
Replied by nealuk on topic Re: Vigor 2710v & Buffalo NAS WebAccess
Does the Buffalo port clash with port currently in use on the 2710?

e.g. Vigor https management is running on port 443 - so this would take precedance before a rule to get port 443 to your buffalo

Regards, Neal

Please Log in or Create an account to join the conversation.

  • dave_c
  • Topic Author
  • Offline
  • New Member
  • New Member
More
13 Apr 2012 12:24 #71883 by dave_c
Replied by dave_c on topic Re: Vigor 2710v & Buffalo NAS WebAccess
Hi Neal,

Thanks for your help....no the ext port is 40??? & the int 9???.

Regards, Dave

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami