DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2800VG

  • paulcawthorne
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 Apr 2012 22:33 #71875 by paulcawthorne
2800VG was created by paulcawthorne
Dear Technical Support,
Can you help please?
Our DrayTek router is running very slow at 1.9 mb
When testing the line with a Speedtouch router sent by our provider to test the line it runs at 12mb
In both cases the router is connected to the ‘engineer’ phone socket.
How do I regain the fast speed with the Vigor 2800VG router?
I have upgraded the firmware today and it is still slow.
Many thanks for your support.
Regards
Paul Cawthorne

UP = 320000
Down = 1952000
SNR = 8.5
Loop 23.5
Corr = 2619
Uncorr = 2

Please Log in or Create an account to join the conversation.

More
13 Apr 2012 09:36 #71879 by nealuk
Replied by nealuk on topic Re: 2800VG
Paul, if your line runs at 12mb with the speedtouch, then your service is ADSL2 / ADSL2+ / ADSL2+ Annex M

Unfortunately the VG2800 is quite elderly now, and whilst it works perfectly with ADSL1 services (up to 8mb) no performance improvement can be made for ADSL2 services.

Sorry.

Regards, Neal

Please Log in or Create an account to join the conversation.

More
17 Apr 2012 16:01 #71917 by jedi98
Replied by jedi98 on topic Re: 2800VG
We have a 2800 running at 15-24 Mbps, it would not go above 8M on G.DMT (Internet Access >> PPPoE / PPPoA menu) but went much higher when set to ADSL2 / or ADSL2+.

Code:
Model Name : Vigor2800 series Firmware Version : 2.8.2 Build Date/Time : Tue Jun 3 15:26:55.35 2008 ADSL Firmware Version : E.38.2.23 Annex A

Code:
ADSL Status Mode State Up Speed Down Speed SNR Margin Loop Att. ADSL2+ SHOWTIME 1144600 15229900 12.0 6.5

Please Log in or Create an account to join the conversation.

More
17 Apr 2012 16:16 #71920 by frag
Replied by frag on topic Re: 2800VG
Depends on the line, the 2800 used first generation ADSL2+ hardware. It's basically a bit senile and decides it hates certain types of lines

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami