DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Using a /28 range on 2850 or 2920

  • theboy
  • Topic Author
  • Offline
  • New Member
  • New Member
More
02 Apr 2012 12:35 #71760 by theboy
Replied by theboy on topic Re: Using a /28 range on 2850 or 2920

adriandaz wrote: I have a 2820 with a /29 however I have been able to use IPs in routed and alias mode without any problems, I suspect this will be the same for the /28.
You will just need to put the secondary IP address onto the LAN for IP routing usage, then you should be able to do both.


How are you managing routing between the NAT'd ones and the ones in the routed IP LAN?

For me, it seems to go through NAT, which oviously means initiating from for routed IP LAN to the devices that are on the private LANs doesn't really work...

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami