DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 SNMP ADSL Interface Counters Broken?!

  • iamq-yesiam
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
15 Feb 2012 13:32 #71228 by iamq-yesiam
2820 SNMP ADSL Interface Counters Broken?! was created by iamq-yesiam
Following the upgrade to the latest firmware (3.3.7.1) the counter information for the ADSL interface looks to be broken.

The LAN interface is working as before, but the ADSL side is showing next to no traffic. There is a correlation between the data gathered via SNMP but its a long way out.

It should be if#4 for the ADSL counters.

Could someone else who runs a similar config have a check and post back - if needed I'll raise this as a bug with Draytek UK.

Logging was working fine before the firmware upgrade, and at this time I am unable to role-back to an earlier version.

Please Log in or Create an account to join the conversation.

More
15 Feb 2012 13:34 #71229 by rj
Hi,

Yes, this is a known "bug".

I really suggest you to report this issue to DrayTek Support, in order to speed up bug fix.

regards,

rj

Please Log in or Create an account to join the conversation.

  • iamq-yesiam
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
15 Feb 2012 13:36 #71230 by iamq-yesiam
Replied by iamq-yesiam on topic Re: 2820 SNMP ADSL Interface Counters Broken?!
Ta.

I'll get onto it this afternoon.

Please Log in or Create an account to join the conversation.

  • iamq-yesiam
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
16 Feb 2012 11:45 #71242 by iamq-yesiam
Replied by iamq-yesiam on topic Re: 2820 SNMP ADSL Interface Counters Broken?!
Has been reported & is being looked at.

Please Log in or Create an account to join the conversation.

More
07 Mar 2012 18:45 #71504 by ramdor72
Replied by ramdor72 on topic Re: 2820 SNMP ADSL Interface Counters Broken?!
any ideas when this might be fixed?

Cheers.

Please Log in or Create an account to join the conversation.

More
08 Mar 2012 09:10 #71510 by voodle
It works in 3.3.5.2 so you can downgrade as a workaround if that doesn't cause problems.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami