DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

DSL or router rebooting? 2820n

  • mike ainley
  • Topic Author
  • Offline
  • New Member
  • New Member
More
09 Feb 2012 11:24 #71118 by mike ainley
DSL or router rebooting? 2820n was created by mike ainley
Hi

We've got a 2820n that has been fine for 6 months. As of last week we've had intermittent dropout (several times a day). What's odd is that the system uptime AND the Wan 1 uptime appear to have reset - does this mean that the router has rebooted rather than just reconnecting the DSL? I wondered about power issues, although it was on a UPS. I've moved it to a different power socket and it's still occuring.

I've attached some of the logfile below - you can see where it just goes from connected to reconnecting. Also odd here is that the date and time go back to Jan 1 and 00:00, although I suppose that could be before it gets to an NTP server?

Can someone give me an idea of what is happening?

Thanks

Mike

<174>Feb 9 10:09:32 Vigor: ADSL_Status:[Mode=ADSL2+(G.992.5) States=SHOWTIME UpSpeed=1125000 DownSpeed=15790000 SNR=6 Atten=29 ]
<166>Feb 9 10:09:36 Vigor: WAN1 PPPoE <== Protocol:LCP(c021) EchoReq Identifier:0x56Magic Number: 0x995b bb 61 00 00 00 00 ##
<166>Feb 9 10:09:36 Vigor: WAN1 PPPoE ==> Protocol:LCP(c021) EchoRep Identifier:0x56Magic Number: 0x0 00 00 00 00 00 00 ##
<174>Feb 9 10:09:41 Vigor: ADSL_Status:[Mode=ADSL2+(G.992.5) States=SHOWTIME UpSpeed=1125000 DownSpeed=15790000 SNR=6 Atten=29 ]
<166>Feb 9 10:09:46 Vigor: WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0x93Magic Number: 0x0 00 00 ##
<166>Feb 9 10:09:46 Vigor: WAN1 PPPoE <== Protocol:LCP(c021) EchoRep Identifier:0x93Magic Number: 0x995b bb 61 ##
<166>Feb 9 10:09:46 Vigor: WAN1 PPPoE <== Protocol:LCP(c021) EchoReq Identifier:0x57Magic Number: 0x995b bb 61 00 00 00 00 ##
<166>Feb 9 10:09:46 Vigor: WAN1 PPPoE ==> Protocol:LCP(c021) EchoRep Identifier:0x57Magic Number: 0x0 00 00 00 00 00 00 ##
<174>Feb 9 10:09:49 Vigor: ADSL_Status:[Mode=ADSL2+(G.992.5) States=SHOWTIME UpSpeed=1125000 DownSpeed=15790000 SNR=6 Atten=29 ]
<166>Jan 1 00:00:05 Vigor: DSL: DSL Channel = 0


<166>Jan 1 00:00:05 Vigor: DSL: PPP Type = 1 (0 : PPPoA, 1 : PPPoE 2:IPoA)


<166>Jan 1 00:00:05 Vigor: DSL: Encapsulation Type = 1 (0: VCMUX, 1: LLC, 2: 1483_LLC_BRIDGED, 3: 1483_LLC_ROUTED, 4: 1483_VCMUX_ROUTED, 5: 1483_VCMUX_ROUTED, 6
<166>Jan 1 00:00:05 Vigor: DSL: VCI = 101


<166>Jan 1 00:00:05 Vigor: DSL: VPI = 0


<166>Jan 1 00:00:05 Vigor: DSL: modulation type = 4 ( 0 : T1.413, 1 : G.Lite, 2 : G.DMT, 4 : MultiAuto)


<166>Jan 1 00:00:06 Vigor: DSL: loading dsl annex A f/w!
<166>Jan 1 00:00:06 Vigor: DSL: Enter tranning Mode!
<166>Jan 1 00:00:06 Vigor: DSL: Status=READY
<166>Jan 1 00:00:09 Vigor: DSL: Status=HANDSHAKING
<166>Jan 1 00:00:15 Vigor: DSL: Status=FULL INITIAL

Please Log in or Create an account to join the conversation.

  • mike ainley
  • Topic Author
  • Offline
  • New Member
  • New Member
More
09 Feb 2012 16:43 #71124 by mike ainley
Replied by mike ainley on topic Re: DSL or router rebooting? 2820n
As an addition to this - I'm not sure if it's actually my browser logins that are causing the reboot? It seems that shortly after I've logged in, it reboots again. I've tried two different browsers (chrome and IE) and it seems to happen with either.

Going to leave it alone now and see how long it stays up for.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami