DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2850n on BT INFINITY

More
07 Feb 2012 20:33 #71110 by adw
Vigor 2850n on BT INFINITY was created by adw
I've recently upgraded to BT Infinity & have a new Vigor 2850n router connected to it. Problem is, I can't get it to connect on the ADSL/VDSL port so I'm currently using it with the BT supplied modem on LAN port 4. I've searched the forums and the Internet for related issues & have tried all the suggestions I found, but nothing has worked so far. There is a configuration guide for the 2750 on the Draytek UK site, but applying those settings to the 2850 doesn't work. I know some people have got this to work successfully, so does anyone have a definitive guide as to how the 2850 should be set up to work properly with BT Infinity/

Andrew

Please Log in or Create an account to join the conversation.

More
18 Feb 2012 09:28 #71263 by roy.p
Replied by roy.p on topic Re: Vigor 2850n on BT INFINITY
Did you get the router to work?

I received my router yesterday and was up and running very fast. Let me know and I will show you the configuration I used :-)

Please Log in or Create an account to join the conversation.

  • chris@progressive-tsl.com
  • Offline
  • New Member
  • New Member
More
18 Feb 2012 15:09 #71265 by chris@progressive-tsl.com
Replied by chris@progressive-tsl.com on topic Re: Vigor 2850n on BT INFINITY
Ive been trying to get a new 2850n working but it wont connect to infinity via the vdsl port. I have also tried using the old bt moden plugged into the lan4 port but I keep getting told the userid or password is incorrect.
i have double check userid & psw on the old netgear and they work fin, any suggestions?

Please Log in or Create an account to join the conversation.

More
19 Feb 2012 11:07 #71270 by roy.p
Replied by roy.p on topic Re: Vigor 2850n on BT INFINITY
The password username I used was 'bthomehub@btbroadband.com' and the password was blank (no space or anything!)

The only other setting I adjusted was

VLAN Tag insertion (VDSL): Tag value: 101

I did nothing else, It just worked for me.

Hope this helps :-)

Please Log in or Create an account to join the conversation.

  • chris@progressive-tsl.com
  • Offline
  • New Member
  • New Member
More
20 Feb 2012 09:53 #71275 by chris@progressive-tsl.com
Replied by chris@progressive-tsl.com on topic Re: Vigor 2850n on BT INFINITY
Thanks for the feed back, I have now got infinity working using the BT modem, and will try changing the tag setting over the next weekend with the VDSL port

Please Log in or Create an account to join the conversation.

More
22 Feb 2012 15:03 #71327 by 21alpha
Replied by 21alpha on topic Re: Vigor 2850n on BT INFINITY
Hi
I got my 2850n last night and followed the quick setup guide.
I couldnt connect to the internet via WAN 1 (VDSL) port until I put the VLAN ID tag of 101 into the relevant page. As soon as I did that - Bingo!

username: bthomehub@btbroadband.com
password: (blank, nothing in it)

hope this helps

P.S am not a network expert by any means, so if someone can tell me how to configure LAN 4 ports as just an ethernet port for a computer rather than a WAN port this would be greatly appreciated. I'll start a thread actually which might help other users.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami