DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Port forwarding on 2700 not working

  • robstardotstar
  • Topic Author
  • Offline
  • New Member
  • New Member
More
31 Jan 2012 11:51 #71002 by robstardotstar
Port forwarding on 2700 not working was created by robstardotstar
I have had to reset my router to defaults recently, I'm trying to enter my forwarding rules, but none of them are working.
Even if I try DMZ nothing works. Even if I disable the firewall the ports are still closed.

I'm trying to forward 80 & 22 to 192.168.20.5

I have a 2700 adsl2+ router.

Index Service Name Protocol Public Port Private IP Private Port Active
1 git tcp 22 192.168.20.5 22 x
2 git udp 22 192.168.20.5 22 x
3 gitweb tcp 80 192.168.20.5 80 x

Please Log in or Create an account to join the conversation.

More
31 Jan 2012 14:27 #71004 by nealuk
Replied by nealuk on topic Re: Port forwarding on 2700 not working
The reset has probably put back the Routers own interfaces for HTTP to port 80, FTP to 21/22 etc.

Anything listed on the built in Management, Web SSL, VPN set up etc. takes precedence, ahead of your forwarding fules.

So, you need to change the port clashes 20,21,22,23,80,443 to start off with. Even if you never intend to Telnet in to the Vigor, for example, you still must change it to allow your custom port forward fule to take effect.

Under Management Port Setup put the radio dot in User Define Ports and I would suggest:

  • Telnet Port 8023
    HTTP Port 8080
    HTTPS Port 8043
    FTP Port 8021
    SSH Port 8022


Then your rules should kick in. Regards, Neal.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami