DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2750n connection

  • montyp
  • Topic Author
  • Offline
  • New Member
  • New Member
More
30 Jan 2012 10:13 #70982 by montyp
Vigor 2750n connection was created by montyp
Hi all.

I have had this problem a couple of times now.

When I booted my pc this morning the small network monitor on the toolbar, bottom right, finished up with the small yellow icon inside it. I could not check email or anything we related, booted another pc and just the same.

I ran a Command Prompt and typed ipconfig /all and everything suggested the connection was ok.

I logged into the router and on the right hand side inside the Wan box it said " Link Status: Disconnected"

I then clicked the "Online Status" and and everything on that pages seems to show that the router is connected.
I did a Reboot of the router but no change.

I them powered down the router and after 5 minutes powered it back on and once all the lights had settled everything worked fine, but I still get this in the Wan box on the System Status screen:- " Link Status: Disconnected".

The last time this happened is about 10 days ago, anyone have anything similar.

I am running firmware v1.5.1

Please Log in or Create an account to join the conversation.

More
30 Jan 2012 10:51 #70984 by wilhadden
Replied by wilhadden on topic Re: Vigor 2750n connection
Some people, like myself have similar problems that manifest in different ways.

Can you post a screenshot from the Online Status page?

Wil

Please Log in or Create an account to join the conversation.

More
30 Jan 2012 14:15 #70987 by regchan
Replied by regchan on topic Re: Vigor 2750n connection
are you using filters try disabling them

or look at dns servers in the lan 1 or how ever you set it up make sure its not blank

Please Log in or Create an account to join the conversation.

  • montyp
  • Topic Author
  • Offline
  • New Member
  • New Member
More
30 Jan 2012 14:42 #70990 by montyp
Replied by montyp on topic Re: Vigor 2750n connection

regchan wrote: are you using filters try disabling them

or look at dns servers in the lan 1 or how ever you set it up make sure its not blank



Nope, not using any filters.

Here is an image of my Lan setup.

Only way for me to upload an image just yet till I find a better way.


Please Log in or Create an account to join the conversation.

  • montyp
  • Topic Author
  • Offline
  • New Member
  • New Member
More
30 Jan 2012 15:15 #70991 by montyp
Replied by montyp on topic Re: Vigor 2750n connection

wilhadden wrote: Some people, like myself have similar problems that manifest in different ways.

Can you post a screenshot from the Online Status page?

Wil



This is an image when first logged into router, if that is what you want.

Please Log in or Create an account to join the conversation.

More
30 Jan 2012 16:14 #70994 by wilhadden
Replied by wilhadden on topic Re: Vigor 2750n connection
Hmm, it looks like you have connected at some point and got your IP details.

Can yo go to the Online Status link on the left and upload a screenshot from that page?

Out of interest have you set the VLAN to 101 ala http://www.draytek.co.uk/support/kb/kb_vigor_v2750_setup.html

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami