DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Restrict Internet Access by IP and Time

  • nigelbroomhall
  • Topic Author
  • Offline
  • New Member
  • New Member
More
24 Jan 2012 23:40 #70915 by nigelbroomhall
Restrict Internet Access by IP and Time was created by nigelbroomhall
A little help from from the collective please..

I have a Draytek 2820 with Firmware Version 3.3.4.1_232201. Previousely I had a Netgear DG834.

In the Netgear I had bound the childrens phones and LTs to static IP addresses. I then setup a time schedule and a simple firewall rule to block their IPs from internet access from the scheduled time while allowing all other devices to work quite happily.

In the Draytek I am having problems achieving the same thing. What I have done so far:

I have bound the devices to static IP addresses.
Created a schedule (21:00 for 10 hours) with Action "Force Down".
Created a new Firewall Filter Set (No.3).
So, Filter Set 3 Rule 1 has:
Schedule 1
Direction: LAN-WAN
Source IP Range: 192.168.1.40~192.168.1.45
Designation: Any
Service: Any
Fragments: Don’t Care
Filter: Block Immediately

Come 21:00 they just carried on surfing without an issue.

Please can someone tell me what I'm doing wrong and/or give me a step by step guide on how to make this work?

The Draytek was highly recommended (and not cheap) so I am hoping this basic function should be easy enough.

Many thanks.

Regards, Nigel

Please Log in or Create an account to join the conversation.

More
27 Jan 2012 12:04 #70942 by drummerjohn
Replied by drummerjohn on topic Re: Restrict Internet Access by IP and Time

nigelbroomhall wrote:
Created a schedule (21:00 for 10 hours) with Action "Force Down".


You need two schedules. One from 21:00 with a duration of 3 hours. Another from 0:00 duration 7 hours. The software doesn't allow for schedule to cross midnight.

Action needs to be Force On (that's what I have mine set as).

Please Log in or Create an account to join the conversation.

More
01 Feb 2012 18:11 #71028 by rj
Hi,

You can also check a pratical example on DrayTek HQ website : http://www.draytek.com/user/SupportAppnotesDetail.php?ID=1281

Hope this helps,

regards,

rj

Please Log in or Create an account to join the conversation.

  • nigelbroomhall
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Feb 2012 17:17 #71234 by nigelbroomhall
Replied by nigelbroomhall on topic Re: Restrict Internet Access by IP and Time

drummerjohn wrote:

nigelbroomhall wrote:
Created a schedule (21:00 for 10 hours) with Action "Force Down".


You need two schedules. One from 21:00 with a duration of 3 hours. Another from 0:00 duration 7 hours. The software doesn't allow for schedule to cross midnight.

Action needs to be Force On (that's what I have mine set as).



That worked a treat thank you. Spot on. :)

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami