DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2920 + Dual WAN

  • gbredneck
  • Topic Author
  • Offline
  • New Member
  • New Member
More
22 Dec 2011 18:55 #70548 by gbredneck
2920 + Dual WAN was created by gbredneck
Hi All

I've searched through the board and not found any problems similar to mine.

Heres the setup:

Draytek 2920n - LAN IP - 192.168.80.254

1 x BT Infinity - WAN 1 (Fixed IP)
1 x Virgin Media 100 mbit residential connection - WAN 2 (Dynamic IP)

Servers / NAS - 192.168.80.1 through 192.168.80.20
Workstations - 192.168.80.50 through 192.168.80.100

I'd like to set it up to force all traffic from the server IP range through the fixed IP connection ie; WAN1

and the workstations IP range forced through the WAN2 connection.

Is this possible? or have any of you guys got it working? i feel a little dense asking this one.

Look forward to your responses.

Rob

Please Log in or Create an account to join the conversation.

  • gbredneck
  • Topic Author
  • Offline
  • New Member
  • New Member
More
22 Dec 2011 19:08 #70549 by gbredneck
Replied by gbredneck on topic Re: 2920 + Dual WAN
Sometimes i should just read the manual. Load balancing policy did the trick, first bundle of IP's through WAN1 and the second set through WAN2 appears to be working.

Only time will tell how reliable this will be in the next few weeks.

Please Log in or Create an account to join the conversation.

More
23 Dec 2011 11:08 #70557 by drummerjohn
Replied by drummerjohn on topic Re: 2920 + Dual WAN
Been working for me really well for last couple of weeks. I even set up a port 80 rule for my games pc. Port 80 to be used for WAN1 (VirgIn Media 30MB) so I can download at speed. All other ports to use WAN2 (Bethere ADSL2), which has better latency for gaming.

Please Log in or Create an account to join the conversation.

  • gbredneck
  • Topic Author
  • Offline
  • New Member
  • New Member
More
23 Dec 2011 11:11 #70559 by gbredneck
Replied by gbredneck on topic Re: 2920 + Dual WAN
Am guessing i could do the same, just moving the rules up to the top of the list.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami