DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

DUAL WAN on a 2820

  • jeremyisherwood
  • Topic Author
  • Offline
  • New Member
  • New Member
More
21 Dec 2011 16:29 #70536 by jeremyisherwood
DUAL WAN on a 2820 was created by jeremyisherwood
Has anybody had much success setting up a 2820 for DUAL WAN.

Every time I try I lose internet on WAN 1, with nothing on WAN 2. I'm using the latest firmware 3.3.7_232201

I'm trying to use WAN2 for my SIP traffic, but not getting on very well. Has anybody move to a PEPLINK?

Jeremy.

Thanks for looking, and any help is much appreciated.

Please Log in or Create an account to join the conversation.

More
22 Dec 2011 10:01 #70547 by voodle
Replied by voodle on topic Re: DUAL WAN on a 2820
Dual WAN certainly works well for me - if you want SIP traffic to go through WAN2, make a load balance rule under the WAN - Load Balance Policy menu, in there set up a rule for all traffic for a specific destination IP address (which I'm guessing will work if you're using hosted VoIP or a remote PBX) to go through WAN2.
No idea why you'd see WAN1 not work when WAN2 is up though?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami