DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Resync without reboot?

  • grantm
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
29 Nov 2011 16:50 #70259 by grantm
Resync without reboot? was created by grantm
2830n running 3.3.7_b1108

Is there a way to resync the physical ADSL connection without a full reboot? My line suffers from variable SNR - it would be nice to resync more quickly than going through a full reboot cycle.

TIA.

Please Log in or Create an account to join the conversation.

More
07 Dec 2011 14:35 #70380 by ahxcjb
Replied by ahxcjb on topic Re: Resync without reboot?
You could 'disable' the WAN1 connection, then re-enable it again? That would cause a re-sync.

Can I ask a question though, where did you get the 3.3.7 firmware from? I'm on
Firmware Version : 3.3.6.1_232201
Build Date/Time : May 26 2011 15:25:20

I have single band 2830n.

Please Log in or Create an account to join the conversation.

More
07 Dec 2011 23:27 #70397 by voodle
Replied by voodle on topic Re: Resync without reboot?
just do "adsl reboot" from telnet, that'll restart the sync of the ADSL

Please Log in or Create an account to join the conversation.

  • grantm
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
10 Dec 2011 17:27 #70429 by grantm
Replied by grantm on topic Re: Resync without reboot?
I did try the disable/re-enable but it didn't appear to resync.

The FW came from Draytek support via email to fix a problem with Xboxes and WPA2.

Voodle, thanks for the telnet command. Is there a glossary of telnet commands?

Please Log in or Create an account to join the conversation.

More
17 Feb 2012 16:36 #71260 by tk_1
Replied by tk_1 on topic Re: Resync without reboot?
Try ftp://ftp.draytek.com/Document/Telnet_Commands_V1.11.zip its also listed in the downloads section on the support menu. Bear in mind its a generic list and not specific to any one device so may have commands not supported on your model and firmware revision.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami