DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820n 3.3.7

More
23 Nov 2011 13:44 #70192 by j03y
Replied by j03y on topic Re: 2820n 3.3.7

nealuk wrote: It is a long time known issue that configs aren't portable between different draytek firmwares. Irritating, but true. Hence I have thick files of print outs to make the config from scratch each time.



PaTr10T wrote: Agree, have been using various Draytek devices for a number of years now and always found a full rst plus manual rebuild appears to provide the most stable system. 3.3.7 has been rock solid for me since deploying and most importantly, resolved the Sip registration timeout issues as per previous firmwares.



Much agree. It just isn't practical to be doing this all the time. Whether it's too much to ask of a £200 router is open to discussion I guess.

Please Log in or Create an account to join the conversation.

More
23 Nov 2011 18:05 #70194 by steveo888
Replied by steveo888 on topic Re: 2820n 3.3.7
Flashed this morning with the 3.3.7 all restored config from backup, port forwarding working ok, sips working ok, last night I took 120 screenshots of my settings on the 3.3.5 firmware just incase things dont jell to good with the .all firmware, can't seem to get syslog to log calls to and from sips, but that's all at the moment.
I've use a Virgin media cable connection on Wan2 thats all.
steveo888

Please Log in or Create an account to join the conversation.

More
25 Nov 2011 18:01 #70222 by mrdraytek
Replied by mrdraytek on topic Re: 2820n 3.3.7

oxygendebt wrote: I use PRTG Network Monitor on my home network.

Upgrading from 3.3.5.2 to 3.3.7 (*.rst, but uploading an old config file rather than a manual rebuild) breaks the SNMP logging that PRTG relies on.

The SNMP settings in the 2820n web GUI (system maintenance -> management tab) were unchanged; no extra settings or any changes apparent between the firmware upgrades.

Anyone else had a similar issue? PRTG works (i.e. logs throughput) again instantly if I pull back to 3.3.5.2

Jon



I use MRTG to monitor the bandwidth utilisation on my 2820vn with SNMP and since upgrading my firware to 3.3.7 it is now broken. I contacted support and they said that the values reported my SNMP in the new firware are dividing the values by 100. So I set my MRTG config file to multiply the values by 100 but it still didn't help and the values looked weird. I would be downloading a file using 8 megabits of bandwidth and MRTG would report it as 100 kilobytes per second.

Their sugguestion was for me to downgrade to 3.3.5.2 and since I have done that it has solved my problem.

I have always been REALLY happy with my Draytek router but this firmware release is disappointing.

Please Log in or Create an account to join the conversation.

More
02 Dec 2011 01:30 #70297 by toibs
Replied by toibs on topic Re: 2820n 3.3.7
Can anyone confirm that DMZ'ing and port forwarding work under 3.3.7? I;ve just DMZ's an IP camera, and it still seems as blocked at ever from the web.... Very strange...

Cheers
Paul

Please Log in or Create an account to join the conversation.

More
05 Dec 2011 17:27 #70348 by pol098
Replied by pol098 on topic Re: 2820n 3.3.7
A discussion in Australia reports various issues with 3.3.7 and reports a later beta which appears to work better than the 3.3.7 release (with links).
http://forums.whirlpool.net.au/archive/1576557

HTH

Please Log in or Create an account to join the conversation.

More
07 Dec 2011 00:15 #70372 by jedi98
Replied by jedi98 on topic Re: 2820n 3.3.7 (new beta_0414)
For me the beta from the polish site works better than 3.3.7 (so far). The issue I had of being unable to establish an ipsec tunnel with a 2800 is fixed.

Link to file: ftp://ftp.draytek.pl/Seria_2820/Firmware/beta/v2820_AnnexA_r29505.all
Model Name : Vigor2820n
Firmware Version : beta_0414
Build Date/Time : Dec 5 2011 18:13:51
ADSL Firmware Version : 211011_A Hardware: Annex A

Note that this may not be the right adsl modem code for all users but since I am using WAN2 only at present this is not a problem to me.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami