DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2920 and Buffalo Wireless-N Nfiniti ip conflict problems

More
12 Nov 2011 11:37 #70039 by the pit
I've got two Wireless NNfiniti Ethernet bridges (WlI-TX4-AG300NEU
What I've noticed if I plug any device into these the bridges the bridge gets assigned an extra iP address. So device A mac address aa-bb-cc-dd-ee-ff gets an ip address of 192.168.1.6 the bridge mac address a2-b2-c2-d2-e2-f2 will get assigned the same address plus it's own original ip address.
This then causes a conflict warning although everything works regardless.
Any ideas?
The 2920 is using the 3.7.1 firmware from America and the buffalo is using the latest firmware.

Please Log in or Create an account to join the conversation.

More
14 Nov 2011 19:13 #70071 by the pit
Worked round it by making the devices on the Ethernet side of the bridge use fixed ip address's rather than dhcp.
Not the best of solutions but works.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami