DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Minivigor128 USB Terminal Adapter problems - Win 7

  • fixer40000
  • Topic Author
  • Offline
  • New Member
  • New Member
More
26 Oct 2011 13:11 #69818 by fixer40000
I've picked up a couple of these minivigors for use in the office here.
We manage some Panasonic KXTDA PBXs which need to be connected to via ISDN modem.

The modems themselves are working fine, you can configure them after you've set up a dial up connection with them for example.
The issue is controlling the protocol it attempts to connect to the PBXs with. They always seem to connect with the CONN-X75 protocol instead of the standard PPP protocol we need.

The strange thing is that the CONN-X75 protocol was specifically unchecked when we installed the driver so it shouldn't be able to use that.

As there's no options within the PBX management software to change the protocol it uses to dial and there's no configuration option in the Kiosk to set that we're a bit stuck.

Anyone have any insight?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami