DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Smart Monitor Error

  • rancidm
  • Topic Author
  • Offline
  • New Member
  • New Member
More
05 Oct 2011 19:36 #69600 by rancidm
Smart Monitor Error was created by rancidm
Hi.

trying to set up a smart monitor PC for my vigor 2820.
the smart monitor webpage is reporting the error

Cannot monitor for the firmware version of the Vigor router.
Please upgrade its firmware.

the 2820 is running FW 3.3.5.2_232201 which is the latest firmware.

Please advise.

Please Log in or Create an account to join the conversation.

  • rancidm
  • Topic Author
  • Offline
  • New Member
  • New Member
More
07 Oct 2011 10:01 #69615 by rancidm
Replied by rancidm on topic Re: Smart Monitor Error
tried reinstalling both Smart Monitor and also reloading the firmware.
didn't make any difference.

very frustrating...

Please Log in or Create an account to join the conversation.

More
12 Oct 2011 15:50 #69666 by neilosdenning
Replied by neilosdenning on topic Re: Smart Monitor Error
I refer you to an old post of mine

http://www.forum.draytek.co.uk/viewtopic.php?f=14&t=13392

It seems Draytek have not yet mastered this on the 2820

I'm not sure about the 2830 but TBH after all the time I spent on this with the 2820 only to finally be told it just doesn't really work, I'm not sure if I will bother with it

Please Log in or Create an account to join the conversation.

More
13 Oct 2011 09:16 #69675 by voodle
Replied by voodle on topic Re: Smart Monitor Error
I'm using it just fine on a 2820 running one of the beta firmwares, I'm surprised it would've come up with that error on 3.3.5.2 as well.

Maybe ask draytek if they can send you the same beta that I'm using? I've got R28878 on this one.

Also use SmartMonitor 2.2.2 rather than the one from the UK site, it works somewhat better.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami