DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820n with multiple WAN IPs

  • simondo
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
26 Sep 2011 09:50 #69483 by simondo
2820n with multiple WAN IPs was created by simondo
I'm trying to ensure that a machine on the network, when accessing the internet, uses only one of the available public IPs (I have 8 available on WAN 1, and 1 on WAN 2, and it must use only one of the IPs from WAN 1). I've tried various methods of achieving this most recently putting the machine in a DMZ, and been unsuccessful with any consistency. Could somebody tell me how this should be achieved?

Thanks in advance

Simon

Please Log in or Create an account to join the conversation.

More
26 Sep 2011 11:38 #69495 by frag
Replied by frag on topic Re: 2820n with multiple WAN IPs
Hello simon,

You need to use the address mapping feature found under the NAT menu. This should allow you to bind a specific local address to an outgoing public IP address. (you need to add the available IP addresses to the WAN IP Aliasing feature first!).

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami