DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 Block IP when on WAN2

  • andy1878
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 Sep 2011 17:12 #69325 by andy1878
2820 Block IP when on WAN2 was created by andy1878
I have some problems with my broadband from time to time so I have used the WAN2 to connect a netbook running fuduntu which then uses a mobile phone to get an internet connection, a bit HeathRobinson maybe but it gets me online.

But it also gets the whole LAN on line. Is there away of restricting some IPs or MACs when on WAN2?

Or restrict all and allow some?

TIA

Andy

Please Log in or Create an account to join the conversation.

More
13 Sep 2011 09:27 #69328 by nealuk
Replied by nealuk on topic Re: 2820 Block IP when on WAN2
Perhaps in WAN >> Load Balancing

The always on PCs:

Protocol any
Binding WAN interface WAN1 tick Auto failover to the other WAN
Src IP Start 192.168.0.1
Src IP End 192.168.0.99
Dest IP Start [leave blank]
Dest IP End [leave blank]



The WAN 1 only on PCs:

Protocol any
Binding WAN interface WAN1 - don't tick Auto failover to the other WAN
Src IP Start 192.168.0.100
Src IP End 192.168.0.254
Dest IP Start [leave blank]
Dest IP End [leave blank]

Regards, Neal

Please Log in or Create an account to join the conversation.

  • andy1878
  • Topic Author
  • Offline
  • New Member
  • New Member
More
13 Sep 2011 13:20 #69340 by andy1878
Replied by andy1878 on topic Re: 2820 Block IP when on WAN2
Thanks for that, works perfectly - having upgraded firmware so that I got the WAN1 fail over tick box ! :)


Also I see I now can use the USB port for Storage, excelent

Andy

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami