DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Draytek Vigor 120 / 3300 - PPPoA / PPPoE Settings

  • mattstannard
  • Topic Author
  • Offline
  • New Member
  • New Member
More
11 Sep 2011 20:10 #69309 by mattstannard
Hi there,

I currently use a Home Hub but am trying to set up a Draytek Vigor 3300 connected to a Draytek Vigor 120 ADSL Modem.

The settings I took from the Homehub have the username bthomehub@btbroadband.com with no password.

When I plugin my Vigor Modem out of the box it connects fine to the line in that it finds out the speed details and the ADSL light is illuminated. The issue seems to be when I plug it into the Vigor 3300 and use the PPPoE part.

I can't put in a blank password so I tried bthomehub@btbroadband.com with a SPACE for a password. I left the MTU as default and the mechanism as PAP.

For some reason it doesn't connect.

Does anyone know what details should I put in, does the password matter, does BT use PAP or CHAP and what MTU.

Are there any ways I can troubleshoot this?


M

Please Log in or Create an account to join the conversation.

More
12 Sep 2011 10:35 #69315 by nealuk
Ensure the "Display Name:" is kept empty / blank.

Please Log in or Create an account to join the conversation.

More
13 Sep 2011 18:27 #69350 by the pit
Configure the 120 via a laptop or pc. Set the 3300 to ethernet and then plug your 120 in. You should get an ip address. There is a gotcha which I can't remember. I'll find it in a minute.
See this thread http://www.forum.draytek.co.uk/viewtopic.php?f=2&t=15207

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami