DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Problem using call packup on Cisco SPA504G

  • dbroomfield
  • Topic Author
  • Offline
  • New Member
  • New Member
More
23 Aug 2011 15:01 #69124 by dbroomfield
Problem using call packup on Cisco SPA504G was created by dbroomfield
Hi Guys,

wondering if you can help.
from the Vigor Softphone the call pickup option *1 [ext] works fine but when I try and do this from a Cisco SPA504G handset it does not.
I suspect the phone is trying to digit map so I set the call pickup option in IP PBX to *36 (which is the Cisco option) and then removed it from the SPA phone configuration, however I am still unable to perform a call pickup

Please Log in or Create an account to join the conversation.

  • dbroomfield
  • Topic Author
  • Offline
  • New Member
  • New Member
More
23 Aug 2011 16:00 #69125 by dbroomfield
Replied by dbroomfield on topic Re: Problem using call packup on Cisco SPA504G
resolved...
I had an incorrect dial plan configured on the Cisco SPA handset which by default is hard coded for all *xx numbers to be a fixed 2 digit match.. added an additional dial plan entry to allow for the extension

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami