DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2830 wan2 connection

  • laffeg
  • Topic Author
  • Offline
  • New Member
  • New Member
More
28 Jul 2011 19:22 #68803 by laffeg
2830 wan2 connection was created by laffeg
Help ! currently have 2 netgear DG834G routers to 2 separate ADSL lines. Have bought a 2830 with the aim of bandwidth load balancing/ or backup

i have replaced one of the netgears with the draytek and got the main adsl connection up

set the remaining netgear in modem only mode and connected it to wan2 on the draytek

setup wan2 connection as PPPoE with isp username and password but am getting "PPPoE : No repsonse from server side"

am i missing something simple ?

any advice appreciated

laffeg

Graeme

Please Log in or Create an account to join the conversation.

More
28 Jul 2011 23:32 #68806 by voodle
Replied by voodle on topic Re: 2830 wan2 connection
take out the display name for WAN2 if you've got one, that works as a service name and can break PPPoE connections

Please Log in or Create an account to join the conversation.

  • laffeg
  • Topic Author
  • Offline
  • New Member
  • New Member
More
29 Jul 2011 19:27 #68816 by laffeg
Replied by laffeg on topic Re: 2830 wan2 connection
thanks for the suggestion.

got it working by disabling the firewall on the netgear and firmware update and reboot of both

Graeme

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami