DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

reached the max number of permitted Internet sessions V2820

More
02 Aug 2011 10:41 #68837 by nealuk
Firmware: ftp://ftp.draytek.com/Vigor2820/Firmware/V3.3.5.2/AnnexA/

VoIP: The telnet command to disable VOIP is 'voip sip misc -D 1'

Regards, Neal.

Please Log in or Create an account to join the conversation.

More
02 Aug 2011 14:04 #68842 by psykix
Thank you :-)

Will try it out later..

Please Log in or Create an account to join the conversation.

More
02 Aug 2011 17:05 #68843 by psykix
I've put that firmware on and disabled voip. My voip phone registered instantly..

Now to see if it stays registered!

Any pointers for setting up QoS on the 2820 (without using the built in voip capabilites)

Cheers..

Please Log in or Create an account to join the conversation.

More
02 Aug 2011 18:17 #68844 by kc_
Steer clear of the latest beta... caused wireless to stop working after a few hours, data flow monitor can't be enabled and it wouldn't let me flash back to 3.3.5.2.

Please Log in or Create an account to join the conversation.

More
02 Aug 2011 18:47 #68845 by psykix
I'm having an odd issue..

DHCP table is showing an odd MAC address for 5 different IP addresses...

ARP cache seems a bit strange too, and I can't bind an IP to a MAC address due to the ARP cache showing the same MAC address for multiple IP addresses..

All a bit odd.. going to try to revert the firmware back I think..

Please Log in or Create an account to join the conversation.

More
02 Aug 2011 20:22 #68848 by psykix
The odd MAC address in the ARP table seems to be related to my AP-700.. although it is 2 up from the MAC address which the AP-700 says belongs to it..

I'm losing the will to live with voip.. phone just will not stay registered.. I have port forwarded 5060 and 5065 but doesn't make any difference.. Using a port checker says that the ports are closed, but I have forwarded them in exactly the same way that I have done another port which works fine and reports as being open.

Sigh..

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami