DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2830 NAT to VLAN subnet 2

  • dan-graham
  • Topic Author
  • Offline
  • Banned
  • Banned
More
21 Jun 2011 15:07 #68335 by dan-graham
2830 NAT to VLAN subnet 2 was created by dan-graham
I have a new 2830 that i am trying to setup the VLAN's and required subnets.

The main question i have is the ablity to port forward to any of the subnets? I have the VLAN and the subnets up and running (do not use the vlan tag) i have setup 4 vlans and 4 subnets all working ok. The problem i have is when trying to port forward to anything other than the first subnet. can somone confirm this for me? I have servers in both first and seccond subnets that need ports forwarding.

For now i have had to revert back to 2 vlans and use a seccond router for my seccond subnet. this allows me to DMZ host to the seccond router and gives me the portforwarding to the subnet controlled by this seccond router.

Ideally i would like to know how to do this so i can run all subnets from the 2830 and forward ports from my different public IP's to the relevant servers on the seperate subnets.

thanks,

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami