DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Configuring the DrayTek 2710n as replacement for Orange

  • collis
  • Topic Author
  • Offline
  • New Member
  • New Member
More
19 Jun 2011 09:22 #68305 by collis
Hello,

Currently I am connecting to the internet through an Orange LiveBox, and upon further investigation the orange live box uses PPPoA for the dsl line but PPPoE to connect to the service..

Is there any way to use telnet/SSH to configure the draytek vigor 2710n to use more than one iface (interface) to connect to the net getting around the old problem I am currently having that the draytek does not know 'how to' connect to Orange as an ISP.


Any help would be greatly appreciated as I'm stuck. Although technically sound and quite knowledgeable on these matters I have no idea how to string interfaces together or even create new virtual apdapters to put in a bridge for the DSL connection.

Outlined below is the Orange Interfaces:

Code:
Name LAN Ethernet LAN Bridge WAN DSL WAN ETHoA LAN USB LAN Wireless 802.11g Access Point WAN ETHoA 7 WAN PPPoE Device Name eth0 br0 dsl0 ethoa4 usb0 eth1 ethoa6 ppp0 Status Connected Connected Connected Connected Disconnected Disabled Connected Connected Network LAN LAN WAN WAN LAN LAN WAN WAN Underlying Device LAN Ethernet LAN USB LAN Wireless 802.11g Access Point WAN DSL WAN DSL WAN ETHoA 7 Connection Type Ethernet Bridge DSL ETHoA USB Wireless 802.11g Access Point ETHoA PPPoE MAC Address 34:1f:33:80:7b:62 00:1b:bf:6c:66:d0 00:1b:bf:6c:66:d2 00:1b:bf:6c:66:d3 00:1e:37:ac:87:34 00:1b:bf:6c:66:d0 IP Address 192.168.1.5 xx.xx.xx.xx xx.xx.xx.xx Subnet Mask 255.255.255.0 255.255.224.0 255.0.0.0 Default Gateway xx.xx.xx.xx DNS Server 80.10.246.130 81.253.149.9 IP Address Distribution Disabled Disabled Disabled Disabled Disabled Disabled VPI.VCI 8.51 8.35 8.35


Best regards,
James

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami