DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2750 VDSL - no internet access after reboot

  • nick3135
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Jun 2011 19:42 #68299 by nick3135
Hi, I am looking for some help with a couple of issues with a new 2750 on BT Infinity....

1) Almost every time I reboot the router, all connected devices loose internet access. The routers status page shows that the wan port is connected. My devices reconnect to the router OK but I am unable to browse the internet.
The only way I seem to be able to restore internet access is by doing a factory reset!

I have tried the following :-
Warm boot
Cold boot
Unplug from wall
Unplug from wall for around 30min

The only config changes I have made to the router are :
Setup for bt infinity as per http://www.draytek.co.uk/support/kb/kb_vigor_v2750_setup.html
Change WPA password
Add second ssid
Setup port forwarding for 1 xbox as per http://support.xbox.com/en-gb/pages/xbox-live/troubleshoot/connection-issues/nat-type-strict.aspx#forwarding
Turned on DMZ for other xbox

2) Both Xbox's are showing the NAT level as moderate, despite the above config changes to the router. This doesn't seem to be a major issue as both can use xbox live with no apparent issue, but I would like to get rid of the error.

Other than that it's great!

Thanks for your help
Nick

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami