DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 and BT Openreach modem

  • kingussie
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Jun 2011 15:12 #68295 by kingussie
2820 and BT Openreach modem was created by kingussie
Hi
We have just upgraded our broadband to BT Infinity Business and have our 2820 connecting correctly after a bit of fiddling around. We have a customer who wants the same setup but has BT Infinity Home Hub, we can get a good connection but can't access Internet, looks like some sort of DNS thing. Does anyone know if there's a difference between the setups of the two packages? Thanks

Please Log in or Create an account to join the conversation.

More
18 Jun 2011 20:27 #68302 by misterg
Replied by misterg on topic Re: 2820 and BT Openreach modem
It should work fine.. I have the same config working.
is the WAN2 link setup for DHCP and WAN1 disabled?

Please Log in or Create an account to join the conversation.

  • kingussie
  • Topic Author
  • Offline
  • New Member
  • New Member
More
19 Jun 2011 17:53 #68311 by kingussie
Replied by kingussie on topic Re: 2820 and BT Openreach modem
lan 1 is disabled and lan2 dhcp
it is like the DNS is blocked
jr

Please Log in or Create an account to join the conversation.

More
19 Jun 2011 19:12 #68314 by voodle
Replied by voodle on topic Re: 2820 and BT Openreach modem
Is the draytek on 192.168.1.1 and the home hub on 192.168.1.254? That would stop internet access from working as local PCs would be trying to reach .254 directly rather than using the router as the gateway.

The best setup, is if you've got the white openreach modem is to plug that into WAN2 and set up the connection using PPPoE which will work best.

Please Log in or Create an account to join the conversation.

More
19 Jun 2011 22:35 #68315 by misterg
Replied by misterg on topic Re: 2820 and BT Openreach modem

Voodle wrote:
The best setup, is if you've got the white openreach modem is to plug that into WAN2 and set up the connection using PPPoE which will work best.



This..
Under Wan settings enable PPPoE and have "bthomehub@btinternet.com" as the username.. and i just use "password" as the password.

Please Log in or Create an account to join the conversation.

  • kingussie
  • Topic Author
  • Offline
  • New Member
  • New Member
More
20 Jun 2011 08:13 #68318 by kingussie
Replied by kingussie on topic Re: 2820 and BT Openreach modem
the IP and gate way of the LAN side I don't thing is an issue
we use 192.168.23.1 as the router IP gate way ..

Yes it is using the open reach modem on WAN2 and connecting OK
we can ping eg www.bbc.com ok
but surfing is like as if in teacle
Take the same hardware same setting aprt form username and password
and it will fly on a infinty buseness connection
revert back to the BT Home hub and it too flys on the Home system

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami