DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Two lines one line half speed question

  • nps
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
25 May 2011 13:46 #67908 by nps
I have a Vigor 2820 with WAN1 line giving about 1.4Mbps with line attenuation of 51dB and SNR of 10.
My second line for WAN2 via a BT 2-Wire runs at 4.2mbs with line attenuation of 49 dB.

Is my difference likely to be due to Vigor or my line or BT?
Vigor is runing
Model Name : Vigor2820Vn
Firmware Version : 3.3.5.2_232201
Build Date/Time : Apr 7 2011 18:10:43
ADSL Firmware Version : 232201_A Hardware: Annex A

Please Log in or Create an account to join the conversation.

More
25 May 2011 16:46 #67909 by nealuk
Replied by nealuk on topic Re: Two lines one line half speed question
Line 1 is on what kind of service ? "Up to 8 Meg" does it connect at G.DMT or something else ?

Line 2 is with a different provider, or the same? What kind of service ? Perhaps it's an ADSL2+ connecting at AnnexM ?

Sometimes the Drayteks they don't always detect (using Multimode) the fastest available negotiation for your line - if this is the case you can select it manually.

Please Log in or Create an account to join the conversation.

  • nps
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
25 May 2011 18:57 #67913 by nps
Both lines are BT and connect on G.DMT up to 8meg lines

Please Log in or Create an account to join the conversation.

More
26 May 2011 09:10 #67921 by voodle
Replied by voodle on topic Re: Two lines one line half speed question
Try the 211801 modem code, that should improve speeds a little on WAN1

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami